Fusion TEM Heating and Electrical System

Fusion heating and electrical systems transform a standard TEM or SEM into an in situ laboratory. Our new product combines heating, electrical and electrothermal analysis and uses advanced holder and E-chip technology that provide ultra-high stability and accuracy. With Fusion, you can see samples under real-world conditions at atomic resolution and produce more results in less time.

The Fusion Advantage

The Fusion Advantage

▶Click the image

The Fusion Key Features

1/3

▶Click the image

Fusion TEM
Heating and Electrical Holder
Case Study

Electric-field assisted sintering of ZrO2

Sintering is the process of forming a solid mass of material without melting the material. It often leaves voids and pores, which compromises material strength. Sintering by temperature alone occurs at high temperatures (~80% of the melting point) and can take several hours.

Electrical current is often used in addition to temperature to lower the required temperature and reduce the length of the sintering process. However, the role of this current is still largely unknown at the nanoscale.

Until recently there was not a commercially available solution that could heat and apply current to a sample within the electron microscope. Researchers in the van Benthem group at University of California Davis studied sintering mechanisms in yttria-stabilized ZrO2 (3YSZ), using TEM and STEM images to monitor the microstructural evolution of the agglomerates during densification.

 

 

 

 

 

 

 

 

 

 

 

When they used Protochips’ Fusion to apply 900 °C to the sample, the structure remained unchanged for 106 minutes. They then raised the temperature to 1200 °C, at which point the pores shrank.

To see the effect of electrical current, the researchers applied a field of 500V/cm and a temperature of 900 °C. After just 4 minutes, pore shrinkage and coalescence occurred, confirming the field-assisted sintering.

상호 : 나노비즈 코리아  사업자등록번호: 520-65-00158

주소: #1201, Nonhyeon Bldg., 183, Bomun-ro, Seongbuk-gu, Seoul, Korea(02861)

TEL:82-2-923-3881  CELL PHONE:010-3396-3881   FAX: 070-7755- 3881

E-mail: kschae@nanobizkorea.com

© Copyright 2016 NanoBiz Korea | All Rights Reserved